Upconverter/Downconverter
We have done a lot of creative work in the fieldof ultra-small and highly integrated microwaveassemblies. We use process of LTCC, microwavecomposite Circuit board and 3-D Air Dielectric Coax,combined with our own multi-functional chip design,we have designed a series of small broadbandgeneral microwave assemblies. Smaller size, lower power consumption, to providecustomers with better solutions.
Downconverter
PMD525P |
Min |
Type |
Max |
Frequency Range |
0.38GHz |
- |
18GHz |
IF Output Frequency |
1600MHz |
- |
200MHz
(band width) |
IF In-band Flatness |
- |
±2dB |
- |
Chain Total Gain |
35dB |
- |
40dB |
Variable Gain Range |
- |
- |
55dB |
Variable Gain Step |
1dB |
- |
- |
NF |
- |
12dB |
- |
Input Level Range |
-110dBm |
- |
+15 dBm |
Spurious |
- |
- |
-55 dBc |
Harmonics |
- |
- |
-56 dBc |
IM3 ★ |
- |
- |
-60dBc |
OIP2 |
- |
+40dBm |
- |
Output P-1dB |
- |
+15dBm |
- |
Control Mode |
- |
Serial Communication |
- |
Power Suppl |
- |
+12V |
- |
Connectors |
- |
RF Connector :SSMA-F |
- |
Note: ★ Test condition: Dual tone input level: - 20dBm
Upconverter
PMD521P |
Min |
Type |
Max |
Input freq |
10MHz |
- |
500MHz |
Direct freq |
10MHz |
- |
300MHz |
Conversion path freq |
300MHz |
- |
6GHz |
IF2 freq |
- |
1250MHz |
- |
PMD522P |
Min |
Type |
Max |
Output freq |
100KHz |
- |
18GHz |
Direct freq |
100KHz |
- |
300MHz |
Conversion path freq |
300MHz |
- |
18GHz |
IF freq |
- |
1.6GHz |
- |
Downconverter
PMD523P |
Min |
Type |
Max |
RF freq |
6GHz |
- |
26.5GHz |
IF freq |
50MHz |
- |
3GHz |
IF bandwidth |
- |
customized |
- |
Conversion gain |
- |
15dB |
- |
LO Isolation |
- |
-60dBm |
- |
Spurious |
- |
-60dBc |
- |
NF |
- |
15 |
- |
Input IP3 |
- |
-7dBm |
- |
Input P-1dB |
- |
-8dBm |
- |
RF Input level |
- |
- |
20dBm |
LO range |
6GHz |
- |
26.5GHz |
LO step |
- |
customized |
- |
LO switch time |
- |
customized |
- |
Reference |
- |
10MHz |
- |
Ref level |
-8dBm |
- |
+13dBm |
Operating temp |
-40℃ |
- |
+70℃ |